Home About Directions FAQ Where to Buy Reseller Contact
 ©2016 CDDVDGuard.com
Extremely flammable. Contents under pressure. Do not puncture, incinerate or crush. Do not expose to heat or store at temperatures above 120° as can may burst.  Do not use if spray button is missing or defective. Avoid inhalation. Use in a well ventilated area. Wear a mask during repeated use. Do not spray in eyes. Avoid contact with skin. Do not swallow. If any of the above occur, seek immediate medical attention or call poison control. Keep out of reach of children. May form flammable/explosive vapors. Keep away from any sources of ignition. No smoking. Manufacturer and distributor do not accept responsibility for claims of damages or injury.
CAUTION
Shake can well before each use. Make sure inkjet printed surface is dry. Set CD/DVD/Photo down, printed side up, on a clean, flat surface. Spray CD/DVD Guard Inkjet Protection Spray evenly, on printed surface,  from a distance of approximately 12 inches. A few thin coats on top of each other give the best results. Allow the spray to dry for approximately 3 minutes after final coat. When finished, turn can upside down and spray until only gas escapes,  to prevent nozzle from clogging.
DIRECTIONS
CD/DVD Guard Inkjet Protection Spray contains no CFC's.
Home About Directions FAQ Where to Buy Reseller Contact Directions Directions